Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
- 17. Appendix
   17.1. Search and elimination of malfunctions of system of start of the engine
   17.2. Search and elimination of malfunctions of window regulators with an electric drive
   17.3. Search and elimination of malfunctions of control and measuring devices
   17.4. Search and elimination of malfunctions of system of lighting
   17.5. Search and elimination of malfunctions of the electronic alarm system (ETACS – Electronic Time and Alarm Control System)
   17.6. Search and elimination of malfunctions of the switch of a screen wiper
   17.7. Search and elimination of malfunctions of an external rear-view mirror with an electric drive
   17.8. Data for adjustments and control
+ 18. Electroschemes






17. 8. Data for adjustments and control

Frequency of rotation of idling, mines-1
SOHC
800±100
DOHC
750±100
The carburetor
850±100
Corner of an advancing of ignition to VMT
SOHC
9 °±5 °
DOHC
9 °±5 °
The carburetor
5 °±5 °
Belt deflection, by pressing it effort of 98 N (10 kg) in a place located on identical removal from pulleys
Belt of a drive of the generator and pump of the amplifier of a steering
7-10 mm
Belt of a drive of a drive of the generator and conditioner
New belt
5–5,5 mm
The belt which was in the use
6–7 mm
Interelectrode gap of a spark plug
1,0-1,1MM
Free wheeling of a pedal of coupling
6,13 mm
Distance from a pedal to a floor at the pressed pedal
90 mm
Course of a pedal of coupling
145 mm
Minimum admissible distance to heads of rivets at limiting wear of frictional overlays of a disk of coupling
1,1 mm
Distinction of height of the ends of a diafragmenny spring
0,5 mm
Convergence of forward wheels
0±3 mm
Disorder of forward wheels
3±2 mm
Convergence of back wheels
0 °±30'
Disorder of back wheels
- 41 °±30'
Wheel palpation
Steel disks
The radial
0,6
The axial
1,0
Aluminum disks
The radial
0,3
The axial
0,3
Height of installation of a pedal of a brake
163,5 mm
Course of a pedal of a brake
135 mm
Gap of the switch of stoplights
0,5-1,0 mm
Free wheeling of a pedal of a brake
3-8 mm
Distance from the pressed pedal of a brake to a floor
50 mm
Gap between a pusher of the vacuum amplifier of brakes and the main brake cylinder
0 mm
Course of the lever of the parking brake, at a tightening its effort of 196 N
6-7 clicks
Minimum admissible thickness of overlays of forward brake shoes
2,0 mm
Minimum admissible thickness of a brake disk
17 mm
Palpation of a brake disk
0,05 mm
Minimum admissible thickness of overlays of back brake shoes
1,0 mm
The most admissible diameter of boring of a brake drum
182 mm
The most admissible gap of the piston in the working brake cylinder
0,15 mm
Air gap of the sensor of frequency of rotation of a wheel
0,2-1,2 mm