Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Anti-blocking system of brakes (ABS)
   13.3. Pumping of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of provision of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Pumping of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of the parking brake
   13.8. Vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. Pressure regulator
   13.11. Brake pedal
   13.12. Replacement of forward brake shoes
   13.13. Support of a forward brake
   13.14. Main brake cylinder
   13.15. Replacement of brake shoes on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. Parking brake
   13.18. Hydraulic HECU ABS block
   13.19. Sensor of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






13. Brake system

On cars the working brake system with a hydraulic drive is used.
The system works as follows:

– the pedal of a brake is connected with the main brake cylinder;
– when the pedal is pressed, liquid under pressure from the main brake cylinder on metal tubes and flexible hoses is transferred to lobbies and back brake mechanisms;
– working brake cylinders represent hydraulic modulators which transform the pressure of liquid created in the main brake cylinder, to moving of elements of the brake mechanism;
– lobbies and back pistons of a support of a brake move and at the expense of a friction about brake disks and drums provide demanded delay of the car;
– at an otpuskaniye of a pedal of a brake pressure in system decreases. Brake shoes and pistons come back to a neutral or starting position and braking stops.

At reduction of level of brake liquid the sensor of level of liquid in the main brake cylinder includes a control lamp in combinations of devices. If the control lamp burns, first of all, check that the parking brake is released, as the lamp indicates the lowered level of liquid and the tightened parking brake.