Hyundai Accent

11. Suspension bracket

AMORTIZATION RACK OF THE FORWARD SUSPENSION BRACKET

1–bottom support of a spring;
2–dustproof cover;
3–top support of a spring;
4–rack support;
5–самоконтрящаяся nut, 60–70 N • m;

6–dustproof cap;
7–nut *, 20–30 N • m;
8–spring;
9–amortization rack of a forward suspension bracket;
10-nut, 75–90 N • m.

Prevention

* the nut which is necessary for tightening the demanded moment only after car installation on wheels Is noted.

Removal

PERFORMANCE ORDER

1. Remove a forward wheel.
	2. Separate an arm of a brake tube of brake system from a rack of a forward suspension bracket.
Prevention Do not tear and do not damage a brake tube.
	3. Unscrew nuts of the top fastening of a rack.
	4. Unscrew nuts and get bolts of fastening of a rack to a rotary fist and get a rack from under a car wing.
5. Installation is carried out to sequences, return to removal.

Dismantling

PERFORMANCE ORDER

1. An edge of a flat screw-driver remove a dustproof cap.
	2. The special adaptation compress a spring of a rack of a forward suspension bracket.
Prevention For compression of a spring use only the reliable tool.
3. Unscrew a lock nut in the top part of a rod of the shock-absorber.
4. Remove a rack support, the top support of a spring, a cylindrical spring, a dustproof cover and the bottom support of a spring.

Check

PERFORMANCE ORDER

1. Check the bearing of a support of a rack on lack of wear or damages.
2. Check rubber details on absence of damages or deterioration of their condition.
3. Check a cylindrical spring on lack of a deflection and elasticity loss.
	4. Check the shock-absorber as follows: a. undertake a hand a rod of the shock-absorber and several times press and extend it from the shock-absorber; b. check that the rod moves smoothly, without jammings, and the effort enclosed to a rod, does not change with each course; c. be convinced that when moving a rod there are no extraneous noise.

Assembly

PERFORMANCE ORDER

	1. Establish the bottom support of a spring so that its ledges entered into openings of a plate of a spring.
2. Establish on the shock-absorber a dustproof cover.
3. The special adaptation compress a spring of a rack of a forward suspension bracket. After complete compression of a spring establish it on the shock-absorber.
Prevention Establish a cylindrical spring the marking directed to the hinge.
4. Completely extend a rod of the shock-absorber and establish the top support of a spring and a rack support.
	Prevention Combine a D-shaped opening in the top support of a spring with lysky on a shock-absorber rod.
	5. Correctly arrange the top and bottom ends of a cylindrical spring, having established them in dredging, and screw самоконтрящуюся a nut, but do not tighten it finally.
6. Remove the adaptation for spring compression.
7. Tighten самоконтрящуюся a nut the demanded moment of an inhaling. Inhaling moment: 60–70 N • m
8. Grease the top bearing of an amortization rack and establish a dustproof cap.
Prevention Be convinced that lubricant did not get on rubber details of a support of a rack.