Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
- 5. Control, decrease in toxicity
5.1. Specifications
5.2. System of ventilation of a case (PCV)
5.3. Valve of ventilation of a case
5.4. Catching system паров fuels
5.5. The canister with absorbent carbon
5.6. The electromagnetic valve of cleaning of the canister with absorbent carbon
5.7. Cover of a toplivnonalivny mouth
5.8. Search and elimination of malfunctions
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
|
Removal
| PERFORMANCE ORDER |
| 1. Disconnect a hose from the valve of ventilation of a case. Remove the valve from a cover of a head of cylinders and connect it to a hose of ventilation of a case. |
| 2. Start up the engine on frequency of idling, a finger close an opening of the valve and be convinced that the depression created in an inlet collector is felt. |
|
Prevention
Plunzher of the valve of ventilation of a case will not move back and forth.
|
| 3. If depression is not felt, clear the valve and a hose of ventilation of a case or replace them. |
|
Check
| PERFORMANCE ORDER |
| 1. Remove the valve of ventilation of a case. |
| 2. For check of moving of a plunzher insert a thin steel core from a carving part of the valve. |
|
3. If the plunzher does not move, means, the valve is littered and, it is necessary to clear or replace it. |
|
Installation
| PERFORMANCE ORDER |
| Establish the valve of ventilation of a case and tighten it the demanded moment. Inhaling moment: 8–12 N • m
|
|
|
|