Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
- 3. Greasing system
   3.1. Specifications
   3.2. Choice of engine oil
   3.3. Sensor of pressure of oil
   3.4. Check of level of engine oil
   3.5. Replacement of engine oil
   3.6. Replacement of the oil filter
   3.7. Oil pump of the SOHC engine
   3.8. Oil pump of the DOHC engine
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes





3.6. Replacement of the oil filter

 All engines are equipped with the high-quality, disposable oil filter.
Prevention

At replacement of the motor filter be careful, as oil hotter and it is possible to burn.

PERFORMANCE ORDER
1. A special key turn out the oil filter. If the rubber sealing ring of the oil filter remained on the block of cylinders, remove it.
2. Grease with a thin layer of pure engine oil a rubber sealing ring of the new oil filter.
3. Screw the oil filter before contact of a sealing ring of the oil filter with the block of cylinders then tighten it by hand.
4. Start up the engine and check absence of leakages of oil.
5. Switch off the engine and wait for 5 mines for oil running off in the pallet. Check level of engine oil and, if necessary, finish it to norm.