Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
- 14. Body
   14.1. Specifications
   14.2. Adjustment of hinges of a cowl
   14.3. Trunk lid
   14.4. Adjustment of a door of a luggage compartment
   14.5. Forward door
   14.6. Back door
   14.7. Moldings
   14.8. Roof hatch
   14.9. External rear-view mirror
   14.10. Central console
   14.11. Dashboard
   14.12. Ceiling furnish
   14.13. Back shelf
   14.14. Luggage carrier upholstery
   14.15. Internal upholstery of salon
   14.16. Windscreen
   14.17. Back glass
   14.18. Front bumper
   14.19. Rear bumper
   14.20. Back seat
   14.21. Forward seat
   14.22. Search and elimination of malfunctions
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes





14.6. Back door

 Removal and installation

PERFORMANCE ORDER
1. Release a bracket of fastening of the handle of a window regulator and remove the handle. The bracket is released if to insert a pure fabric between the handle and an upholstery of a door and, stretching a fabric opposite to the bracket ends, hook on a bracket and release it. Thus it is necessary to pull the handle on itself that she after release of a bracket acted in film with шлицов a window regulator shaft.
2. Turn out the screw of fastening of the internal handle, then press the handle in the direction of loops of a door and remove it from a door upholstery.
3. Turn out screws of fastening of an upholstery of a door.
4. Insert a stripper of an upholstery of a door between an upholstery of a door and a door and release percussion caps.
5. Remove an upholstery of a door and lower glass.
6. Turn out screws of fastening of glass to a window regulator plate.
7. Turn out screws and a bolt of fastening back directing glasses.
8. Remove motionless glass from a back door.
9. Remove mobile glass from a back door.
10. Remove an external vlagozashchitny strip from a back door.
11. Turn out screws and remove a window regulator. Disconnect draft from the internal handle of a door.
12. Remove a latch of a door and the modulator of the door lock.
13. Remove the external handle.
14. Installation is carried out to sequences, return to removal.