Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. Transmission
   - 9.1. Mechanical transmission
      9.1.1. Specifications
      9.1.2. Check of level of oil
      9.1.3. Replacement of transmission oil
      9.1.4. Replacement of an oil sealing ring of a power shaft
      9.1.5. Replacement of a cable of a drive of a speedometer
      9.1.6. Removal and transmission installation
      9.1.7. Transmission repair
      9.1.8. Gear shifting mechanism
      9.1.9. Hydraulic drive of coupling
      9.1.10. Gear shifting lever
   + 9.2. Automatic transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






9.1.3. Replacement of transmission oil


Prevention

At replacement of transmission oil the car should be in horizontal situation.


PERFORMANCE ORDER
1. Turn out a drain stopper and merge in suitable capacity transmission oil from a transmission.
2. Establish on a stopper a new washer and screw a stopper oil plum into place.

Inhaling moment: 30–35 N • m

3. Fill in in a transmission necessary amount of demanded oil so that level of oil was on 5–9 mm below an opening for a stopper of filling of oil.

Oil volume: 2,15 l
Inhaling moment: 30–35 N • m