Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. Transmission
   - 9.1. Mechanical transmission
      9.1.1. Specifications
      9.1.2. Check of level of oil
      9.1.3. Replacement of transmission oil
      9.1.4. Replacement of an oil sealing ring of a power shaft
      9.1.5. Replacement of a cable of a drive of a speedometer
      9.1.6. Removal and transmission installation
      9.1.7. Transmission repair
      9.1.8. Gear shifting mechanism
      9.1.9. Hydraulic drive of coupling
      9.1.10. Gear shifting lever
   + 9.2. Automatic transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes

best cialis alternative cheap cialis effects of cialis on men

9.1.5. Replacement of a cable of a drive of a speedometer

1. Insert correctly the adapter from a reverse side into a combination of devices and fix a new cable of a speedometer.
2. Establish a sealing ring so that the attached part of a cable settled down horizontally in relation to the car.


It is necessary to establish a cable so that the radius of a bend of a cable was not less than 150 mm.

3. Insert a speedometer cable into a transmission and reliably fix it a connecting nut.


If the cable is incorrectly located and unreliably connected, indications of a speedometer can be incorrect and at rotation of a cable there can be an extraneous noise.