The device, service, Hyundai Accent repair - 10.1. Specifications//effexor-xr.ru

Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
- 10. Axes and power shafts
   10.1. Specifications
   10.2. Power shaft
   10.3. A power shaft with CV JOINTS ball and type Birfield
   10.4. A power shaft with Birfield CV JOINTS and tripoidny type
   10.5. Rotary fist and nave of a forward wheel
   10.6. Back axis
   10.7. Search and elimination of malfunctions
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



10.1. Specifications

Name / Engine
1,3 l
1,5 l
Power shaft The external Birfield Birfield
The internal The ball Tripoid
As much as possible tolerances in the hinge Birfield Not less than 45 ° Not less than 45 °
The ball Not less than 22 ° Not less than 22 °
Wheel bearing Type Dvukhryadny radial and persistent ball-bearing
Sizes 70х37 mm

Recommended liquids


Name
Recommended liquids
Quantity
Ball and Birfield hinges of a power shaft (1,3 l)
Protective cover of the Birfield hinge MS511–50 85±5 g (Hinge: 40±3 g, cover: 45±3 g)
Protective cover of the ball hinge MS511–50 75±15 g (Hinge: 45±3 g, cover: 30±10 g)
Tripoidny and Birfield hinges of a power shaft (1,5 l)
Protective cover of the Birfield hinge CENTOPLEX 278M/136K 85±6 g (Hinge: 40±3 g, cover: 45±3 g)
Protective cover of the tripoidny hinge KLKTT41–1D2 (MS511–50, KOREA KLUBER) 95±6 g (Hinge: 60±3 g, cover: 35±3 g)

Moments of an inhaling, N • m


Nuts of fastening of power shafts 200–250  
Nut of fastening of a rotary fist to a rack 75–90 
Nut of fastening of the spherical hinge of the bottom lever to a rotary fist 60–72 
Tip of steering bent for to a rotary fist 16–34 
Support to a rotary fist 65–75 
Nuts of fastening of a wheel 90–110 
Nuts of fastening of a back basic flange 180–200 
Back brake to the holder 50–60 
Nut of fastening of a back rack 76–90 
The longitudinal lever of a back suspension bracket to a support of a back nave 130–150 
The lever of a back suspension bracket to a support of a back nave 130–150