Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
- 10. Axes and power shafts
10.1. Specifications
10.2. Power shaft
10.3. A power shaft with CV JOINTS ball and type Birfield
10.4. A power shaft with Birfield CV JOINTS and tripoidny type
10.5. Rotary fist and nave of a forward wheel
10.6. Back axis
10.7. Search and elimination of malfunctions
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
|
1–bolt, 50–60 N • m;
2–additional arm;
3–draft of the stabilizer;
4–nut, 35–45 N • m;
5–nut, 75–90 N • m;
6–longitudinal lever;
7–nut *, 130–150 N • m;
8–nave support; |
9–back brake mechanism;
10-a nave with the bearing;
11-brake drum;
12-nut, 180–220 N • m;
13-lever (And);
14-the lever (In);
15-nut *, 130–150 N • m. |
Prevention
* nuts which are necessary for tightening temporarily Are specified, and a final tightening to carry out after car installation on wheels.
Removal
| PERFORMANCE ORDER |
| 1. Remove a back wheel. |
| 2. Remove a brake drum. |
| 3. Remove the sensor of frequency of rotation. |
|
4. Disconnect a brake hose from a rack of a back suspension bracket. |
|
5. Unbend a fillet and unscrew a nut of fastening of a nave of a back wheel. |
| 6. Remove a nave of a back wheel with the bearing.
|
Prevention
Needlessly the bearing not to remove from a nave of a back wheel.
|
|
Check
| PERFORMANCE ORDER |
| 1. Check the bearing of a nave of a back wheel on lack of wear and damages. |
| 2. Check a rotor of the sensor of frequency of rotation of a back wheel on lack of a vykrashivaniye of teeths. |
| 3. Check a nave on lack of cracks and wear. |
| 4. Check a nave support on lack of cracks. |
|
Assembly
| PERFORMANCE ORDER |
| 1. Screw a new nut with a fillet and hammer a nut fillet into a nave groove. |
| 2. Establish a nave cap. |
|
|
|