The device, service, Hyundai Accent repair - 11.18. Care of disks from an aluminum alloy//effexor-xr.ru

Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
- 11. Suspension bracket
   11.1. Specifications
   11.2. Bottom lever of a forward suspension bracket
   11.3. Replacement of the plug of the bottom lever
   11.4. Replacement of the plug (G) of the bottom lever
   11.5. Forward stabilizer of cross-section stability
   11.6. Rack of a back suspension bracket
   11.7. Replacement of the plug of the back longitudinal lever of a back suspension bracket
   11.8. Replacement of the plug of the back cross-section lever (And and In) a back suspension bracket
   11.9. Back stabilizer of cross-section stability
   11.10. Corners of installation of forward wheels
   11.11. Adjustment of a convergence of back wheels
   11.12. Wear of tires
   11.13. Antisliding chains
   11.14. Wheel palpation
   11.15. Tightening of nuts of fastening of a wheel
   11.16. Shift of wheels
   11.17. Check of withdrawal and course instability of the car
   11.18. Care of disks from an aluminum alloy
   11.19. Search and elimination of malfunctions
   11.20. Diagnostics of wear of tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



11.18. Care of disks from an aluminum alloy

PERFORMANCE ORDER
1. The aluminum alloy is subject to harmful effects of alkali. If the car was exposed to salt influence from sea water or road himikaliya, it is necessary to wash out immediately the car pure water then to put a wax polyrole on disks of all wheels for protection them from corrosion.
2. When using steam for a wash of the car do not direct it on disks of wheels.
3. At a tightening of nuts of fastening of wheels with aluminum disks observe the following recommendations:

a. clear a plug surface;
b. tighten nuts of fastening of a wheel the demanded moment of an inhaling;
c. do not tighten a nut of fastening of a wheel, pressing a key a foot;
d. do not grease a carving of nuts of fastening of a wheel.