Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
- 11. Suspension bracket
   11.1. Specifications
   11.2. Bottom lever of a forward suspension bracket
   11.3. Replacement of the plug of the bottom lever
   11.4. Replacement of the plug (G) of the bottom lever
   11.5. Forward stabilizer of cross-section stability
   11.6. Rack of a back suspension bracket
   11.7. Replacement of the plug of the back longitudinal lever of a back suspension bracket
   11.8. Replacement of the plug of the back cross-section lever (And and In) a back suspension bracket
   11.9. Back stabilizer of cross-section stability
   11.10. Corners of installation of forward wheels
   11.11. Adjustment of a convergence of back wheels
   11.12. Wear of tires
   11.13. Antisliding chains
   11.14. Wheel palpation
   11.15. Tightening of nuts of fastening of a wheel
   11.16. Shift of wheels
   11.17. Check of withdrawal and course instability of the car
   11.18. Care of disks from an aluminum alloy
   11.19. Search and elimination of malfunctions
   11.20. Diagnostics of wear of tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



11.20. Diagnostics of wear of tires

Wear of the central part of a protector

Very high pressure in the tire
Wear of the central part of a protector to a cord because of a high pressure in the tire

Wear of two lateral parts of a protector


Low pressure in the tire
Camber on закраине tires
Fast wear

Vyryvaniye of pieces of the tire


Vyryvaniye of badly established patch as a result of action of centrifugal force

One party of a protector is worn-out more than the second


Wrong corner of disorder of forward wheels

Flat spots on a protector

Braking with blocking of wheels

Inflow or ledge on the tire


The convergence of wheels is broken

Unreliable fastening of a patch

In one place some patches are established

Non-uniform wear of the tire


Balancing of wheels, malfunctions of steering transfer, a suspension bracket or the bearing is broken

There is no protector drawing


The protector is worn-out below an admissible limit