Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
- 11. Suspension bracket
   11.1. Specifications
   11.2. Bottom lever of a forward suspension bracket
   11.3. Replacement of the plug of the bottom lever
   11.4. Replacement of the plug (G) of the bottom lever
   11.5. Forward stabilizer of cross-section stability
   11.6. Rack of a back suspension bracket
   11.7. Replacement of the plug of the back longitudinal lever of a back suspension bracket
   11.8. Replacement of the plug of the back cross-section lever (And and In) a back suspension bracket
   11.9. Back stabilizer of cross-section stability
   11.10. Corners of installation of forward wheels
   11.11. Adjustment of a convergence of back wheels
   11.12. Wear of tires
   11.13. Antisliding chains
   11.14. Wheel palpation
   11.15. Tightening of nuts of fastening of a wheel
   11.16. Shift of wheels
   11.17. Check of withdrawal and course instability of the car
   11.18. Care of disks from an aluminum alloy
   11.19. Search and elimination of malfunctions
   11.20. Diagnostics of wear of tires
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes





11.1. Specifications

 Suspension bracket

Forward suspension bracket
Type MacPherson with a cylindrical spring
Diameter of a wire x diameter x height of a cylindrical spring, mm 12,3х140х305/314,9
Identification color 12,3х140х305/314,9
Shock-absorber
Type The hydraulic
Course, mm 161
Dempfiruyushchy force at 0,3 m/s Expansion, N 470±100
Compression, N 540±70
Size of tires 155/80 R13, 175/70 R13, 185/60 HR14
Diameter of a disk, mm 4,5JX13, 5Jx13, 5Jx14
Pressure of inflating of the tire, kPa 210
Back suspension bracket
Diameter of a wire x diameter x height of a cylindrical spring, mm 12,0х95,0х150,0
Spring height in a free condition, mm 344
Identification color Yellow-1 line
Shock-absorber
Type The hydraulic
Course, mm 211
Dempfiruyushchy force at 0,3 m/s Expansion, N 390±100
Compression, N 330±70

Corners of installation of wheels

Name
Forward wheels
Back wheels
Convergence, mm 0±3 3±2
Disorder 0 °±30' – 41 °±30'
Corner of a longitudinal inclination шкворня 1°48 '±30'  
Tilt angle rotary шкворня 11°03 '±30'  
Shift rotary шкворня, mm 5,8  

Wheels

Wheel palpation Steel disks Aluminum disks
Radial, mm 0,6 0,3
Axial, mm 1,0 0,3

Moments of an inhaling, N • m

Nuts of fastening of a power shaft 220–250
Top nuts of fastening of a forward rack 20–30
Rack to the hinge 75–90
Самоконтрящиеся nuts are resistant 60–70
The spherical hinge of the bottom lever to the hinge 60–72
Arm to the bottom lever 95–120
Bolt of fastening of an arm of the bottom lever 95–120
Bolt of fastening of an arm of the stabilizer of cross-section stability 17–26
Spherical hinge of a tip of steering draft 15–34
Nuts of fastening of draft of the stabilizer 35–45
Bolt of a back support to the bottom frame 30–40
Nut of fastening of a back support 45–60
Top nut of fastening of a back rack 20–30
Bottom nut of fastening of a back rack 75–90
Самоконтрящаяся nut of a back rack 45–50
Draft of the back stabilizer for the stabilizer of cross-section stability 35–45
Bolt of fastening of an arm of the back stabilizer of cross-section stability 17–26
The lever of a back suspension bracket to a fixing element of an axis 130–150
The lever of a back suspension bracket (And) to a body 100–120
The lever of a back suspension bracket (In) to a body 80–100
Nut of fastening of the back lever to a fixing element of an axis 130–150
Nut of fastening of the back lever to an arm 100–120
The back lever to a body 40–50

Moments of an inhaling, N • m

Spherical hinge of the bottom lever R-2 lubricant As it is required
Rack bearing Lubricant SAE J310a, NLGI No. 1 As it is required