Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. SOHC engines
      2.1.1. Specifications
      2.1.2. Gear belt
      2.1.3. Check of a tension of a gear belt
      2.1.4. Adjustment of a tension of a gear belt
      2.1.5. Poliklinova belt
      2.1.6. Engine support
      2.1.7. Forward cover and oil pump
      2.1.8. Air filter (ACL)
      2.1.9. Head of cylinders
      2.1.10. Yokes
      2.1.11. Hydraulic jacks of gaps of valves
      2.1.12. Replacement of a saddle of the valve
      2.1.13. Replacement of the directing plug of the valve
      2.1.14. Valve
      2.1.15. Camshaft
      2.1.16. Rods
      2.1.17. Cranked shaft
      2.1.18. Flywheel
      2.1.19. Piston finger
      2.1.20. Final collector
      2.1.21. Inlet collector and air chamber
      2.1.22. Block of cylinders
      2.1.23. Removal and engine and transmission installation
      2.1.24. System of production of the fulfilled gases
      2.1.25. Search and elimination of malfunctions
   + 2.2. DOHC engines
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes

2.1.18. Flywheel

1–gear wreath;
2–flywheel;
3–bolt, 130–140 N • m;
4–drive plate;

5–adjusting plate;
6–bolt, 130–140 N • m;
7–adjusting plate.

Removal

PERFORMANCE ORDER

1. Remove a transmission and coupling.

2. Turn out bolts and remove a flywheel. If on the car the automatic transmission is established, remove a drive plate. At a reversing of bolts block a flywheel from a provorachivaniye.

Check

PERFORMANCE ORDER

1. Check a condition of a surface of the flywheel contacting to a disk of coupling. In the presence of considerable wear replace a flywheel.

2. Check palpation of a surface of the flywheel contacting to a disk of coupling.

Palpation: 0,1 mm

3. Check a condition of a gear wreath of a flywheel on absence of damages and wear and if necessary replace it.

Installation

PERFORMANCE ORDER

Establish a flywheel or a drive plate on a cranked shaft. The special tool block a flywheel from a provorachivaniye and tighten bolts of fastening of a flywheel.

Inhaling moment: 130–140 N • m