Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. SOHC engines
      2.1.1. Specifications
      2.1.2. Gear belt
      2.1.3. Check of a tension of a gear belt
      2.1.4. Adjustment of a tension of a gear belt
      2.1.5. Poliklinova belt
      2.1.6. Engine support
      2.1.7. Forward cover and oil pump
      2.1.8. Air filter (ACL)
      2.1.9. Head of cylinders
      2.1.10. Yokes
      2.1.11. Hydraulic jacks of gaps of valves
      2.1.12. Replacement of a saddle of the valve
      2.1.13. Replacement of the directing plug of the valve
      2.1.14. Valve
      2.1.15. Camshaft
      2.1.16. Rods
      2.1.17. Cranked shaft
      2.1.18. Flywheel
      2.1.19. Piston finger
      2.1.20. Final collector
      2.1.21. Inlet collector and air chamber
      2.1.22. Block of cylinders
      2.1.23. Removal and engine and transmission installation
      2.1.24. System of production of the fulfilled gases
      2.1.25. Search and elimination of malfunctions
   + 2.2. DOHC engines
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






2.1.23. Removal and engine and transmission installation

Removal

PERFORMANCE ORDER
1. Remove the storage battery.
2. Remove the air filter.
3. Disconnect electric sockets from the switch of light of a backing and plaits of wires of the engine.
4. On the car with a mechanical five-speed transmission disconnect the electric socket from the regulating valve of a choice.
5. Disconnect electric sockets from the generator and the sensor of pressure of oil.
6. Merge cooling liquid.
7. On the car with an automatic transmission disconnect hoses of an oil radiator of a transmission.

Prevention

Mark hoses before their detachment not to mix them at repeated accession.
Be careful, that transmission liquid from hoses did not flow out. For an exception of hit of dirt close the ends of hoses jams.


8. Disconnect the top and bottom hoses from a radiator and remove a radiator.
9. Disconnect from the engine a wire of connection with "weight".
10. Disconnect a vacuum hose of the vacuum amplifier of brakes.
11. Disconnect from the engine hoses of giving and fuel return.

Prevention

Gasoline is extremely inflammable, at work with elements of fuel system using fire, the sparking devices opened by fire-dangerous light devices and smoking is forbidden. It is necessary to avoid iskreniye emergence at the address with wires and electric devices.


12. Disconnect hoses of system the coolings going to a heater.
13. Disconnect from the engine an accelerator cable.
14. On the car with a mechanical five-speed transmission disconnect a coupling cable from a transmission case.
15. On the car with an automatic transmission disconnect a cable of management of a transmission.
16. Disconnect from a transmission a cable of a drive of a speedometer.
17. Remove from an arm the compressor of central air of air.
18. Lift the car.
19. Merge oil from a transmission.
20. Disconnect a forward exhaust pipe from a final collector.

Prevention

Soft wire fix an exhaust pipe on the car bottom.


21. On the car with a mechanical five-speed transmission disconnect drafts of a choice and gear shifting.
22. Turn out bolts of fastening of the spherical hinge of the bottom lever and the stabilizer of cross-section stability to the bottom lever.
23. Mount pull out internal hinges of power shafts from a transmission.

For an exception of hit of dirt caps close openings in a transmission.

At repeated installation of power shafts establish new lock rings.
24. A soft wire fix the bottom levers and power shafts on a body.
25. Fix captures of the load-lifting mechanism for eyes of the engine and lift so that the weight of the engine was perceived by the load-lifting mechanism.
26. Remove a forward support of the engine.
27. Remove a back support of the engine.
28. On the car with a mechanical five-speed transmission remove a transmission support.
29. Turn out bolts of fastening of arms of support of the engine.
30. Remove from the engine arms of support.
31. Slowly lift the engine so that it departed from support, and temporarily hold him in this situation.

Prevention

Check that all electric sockets, hoses, tubes and plaits of wires are disconnected from the engine.


32. Turn out bolts of fastening of an arm of a transmission to the right wing.
33. Turn out the left bolt of fastening of a support.
34. Inclining a transmission down, lift and remove the engine together with a transmission from the car.

Installation

PERFORMANCE ORDER
1. Establish the engine with a transmission in the car, be thus convinced that did not damage or jammed hoses, plaits of wires, tubes and electric sockets.
2. After engine installation temporarily fix a forward support.
3. After engine installation with a transmission on all support tighten bolts of fastening of support the demanded moments.
4. Repeatedly connect all earlier disconnected elements, be thus especially careful to provide their correct and reliable connection.
5. Repeatedly connect all earlier disconnected elements, be thus especially careful to provide their correct and reliable connection.
6. Check levels and, if necessary, add all liquids.
7. Check work of drafts of gear shifting and an accelerator cable.
8. Check work of all indexes.