The device, service, Hyundai Accent repair - 2.1.6. Engine support//effexor-xr.ru

Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. SOHC engines
      2.1.1. Specifications
      2.1.2. Gear belt
      2.1.3. Check of a tension of a gear belt
      2.1.4. Adjustment of a tension of a gear belt
      2.1.5. Poliklinova belt
      2.1.6. Engine support
      2.1.7. Forward cover and oil pump
      2.1.8. Air filter (ACL)
      2.1.9. Head of cylinders
      2.1.10. Yokes
      2.1.11. Hydraulic jacks of gaps of valves
      2.1.12. Replacement of a saddle of the valve
      2.1.13. Replacement of the directing plug of the valve
      2.1.14. Valve
      2.1.15. Camshaft
      2.1.16. Rods
      2.1.17. Cranked shaft
      2.1.18. Flywheel
      2.1.19. Piston finger
      2.1.20. Final collector
      2.1.21. Inlet collector and air chamber
      2.1.22. Block of cylinders
      2.1.23. Removal and engine and transmission installation
      2.1.24. System of production of the fulfilled gases
      2.1.25. Search and elimination of malfunctions
   + 2.2. DOHC engines
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



2.1.6. Engine support


Removal

PERFORMANCE ORDER
1. Fix captures of the load-lifting mechanism for eyes of the engine and lift so that the weight of the engine was perceived by the load-lifting mechanism.
2. Turn out bolts of fastening of a support of the engine.
3. Remove an engine support from the engine.
4. On cars with a mechanical transmission remove the gear shifting lever.
5. Turn out a bolt of fastening of a transmission.
6. Remove protection of an arch of the right wheel. Turn out bolts of fastening of an arm of a transmission.
7. Remove a transmission arm.
8. Turn out the top and bottom bolts of fastening of a forward support of the engine.
9. Remove a forward support of the engine.
10. Turn out a bolt of fastening of a back support of the engine.
11. Remove a back support of the engine from the bottom frame.