The device, service, Hyundai Accent repair - 2.1.24. System of production of the fulfilled gases//effexor-xr.ru

Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
- 2. Engine
   - 2.1. SOHC engines
      2.1.1. Specifications
      2.1.2. Gear belt
      2.1.3. Check of a tension of a gear belt
      2.1.4. Adjustment of a tension of a gear belt
      2.1.5. Poliklinova belt
      2.1.6. Engine support
      2.1.7. Forward cover and oil pump
      2.1.8. Air filter (ACL)
      2.1.9. Head of cylinders
      2.1.10. Yokes
      2.1.11. Hydraulic jacks of gaps of valves
      2.1.12. Replacement of a saddle of the valve
      2.1.13. Replacement of the directing plug of the valve
      2.1.14. Valve
      2.1.15. Camshaft
      2.1.16. Rods
      2.1.17. Cranked shaft
      2.1.18. Flywheel
      2.1.19. Piston finger
      2.1.20. Final collector
      2.1.21. Inlet collector and air chamber
      2.1.22. Block of cylinders
      2.1.23. Removal and engine and transmission installation
      2.1.24. System of production of the fulfilled gases
      2.1.25. Search and elimination of malfunctions
   + 2.2. DOHC engines
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



2.1.24. System of production of the fulfilled gases

1–bolt, 30–40 N • m;
2–laying;
3–catalytic converter;
4–central exhaust silencer;
5–main exhaust silencer;
6–suspension bracket;
7–nut, 30–40 N • m;
8–bolt, 40–60 N • m;
9–reception exhaust pipe;
10-oxygen sensor;
11-catalytic converter.

Removal

Main exhaust silencer

Prevention

Before removal or survey of elements of system of production of the fulfilled gases be convinced that it cooled down enough.


PERFORMANCE ORDER
1. Disconnect the exhaust silencer from the central pipe.
2. Remove rubber suspension brackets and remove the main exhaust silencer from the car.

Central pipe

PERFORMANCE ORDER
1. Separate the central exhaust silencer from a reception exhaust pipe.
2. Remove rubber suspension brackets and remove the central exhaust silencer from the car.

Catalytic converter

PERFORMANCE ORDER
1. Remove catalytic converter from a reception exhaust pipe.
2. Remove catalytic converter from a head of the block of cylinders.

Reception exhaust pipe

PERFORMANCE ORDER
1. Disconnect the socket from the oxygen sensor.
2. Separate a reception exhaust pipe from catalytic converter or a final collector.
3. Turn out forward tightening a bolt of an exhaust pipe and a nut of fastening of the central exhaust silencer.

Check

PERFORMANCE ORDER
1. Check exhaust silencers and pipes on absence of corrosion and damages.
2. Check rubber suspension brackets on absence of aging and cracks.

Installation

PERFORMANCE ORDER
1. Temporarily establish assembly of catalytic converter, a reception exhaust pipe, the central and back exhaust silencers.
2. Reliably tighten all connections of elements of system of production of the fulfilled gases. Moving to the parties an exhaust system of the car, check, that it did not concern a car body. Otherwise replace rubber suspension brackets of an exhaust system.