Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
- 6. Fuel system
   6.1. Specifications (SOHC and DOHC)
   6.2. Check of the fuel pump
   6.3. Check of the pressure created by the fuel pump
   6.4. Checks of system of injection of MFI
   6.5. Control lamp of malfunctions (MIL)
   6.6. Diagnostic codes of malfunctions of "OBD-II"
   6.7. Diagnostic codes of malfunctions, except «OBD-II»
   6.8. Replacement of the fuel filter
   6.9. Replacement of the limiter of overflow (the double-thread valve)
   6.10. Fuel level sensor replacement
   6.11. Control system of the MFI engine
   6.12. Fuel nozzles
   6.13. Throttle knot
   6.14. A power supply system with the carburetor
   6.15. Check of frequency of rotation of idling
   6.16. Adjustment of frequency of rotation of idling
   6.17. Frequency of rotation of idling and adjustment of a fuel mix
   6.18. Check and adjustment of the starting arrangement
   6.19. Check and adjustment of a free wheeling of a cable of an accelerator
   6.20. Fuel tank
   6.21. Catching canister паров fuels
   6.22. Replacement of the fuel filter
   6.23. Carburetor
   6.24. Cable and accelerator pedal
   6.25. Search and elimination of malfunctions of fuel system with the carburetor
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes





6.24. Cable and accelerator pedal
1–шплинт;
2–accelerator cable;
3–arm;
4–the socket of the switch of an accelerator of cars with an automatic transmission; 		5–bolt, 8–12 N • m;
6–returnable spring;
7–accelerator pedal.

Removal

Accelerator cable

PERFORMANCE ORDER
1. Weaken an adjusting nut of a cable of an accelerator.
2. Disconnect an accelerator cable from the butterfly valve lever.
3. Disconnect an accelerator cable from the lever of a pedal of an accelerator.
4. Turn out two bolts of fastening of a cover of a cable of an accelerator to a partition of a motor compartment and remove it from the car.

Accelerator pedal

PERFORMANCE ORDER
1. Weaken an adjusting nut of a cable of an accelerator, disconnect an accelerator cable from the lever of a pedal of an accelerator and remove a pedal.
2. Remove a returnable spring of a pedal of an accelerator.
3. Take шплинт from an axis of a pedal of an accelerator and remove an accelerator pedal from an arm.

Check

PERFORMANCE ORDER
1. Check a cable of an accelerator and a cable cover on absence of damages.
2. Check smoothness of moving of a cable of an accelerator in a cover.
3. Check an accelerator pedal on lack of a bend.
4. Check a condition of a returnable spring.
5. Check a condition of a tip of a cable of an accelerator.

Installation

PERFORMANCE ORDER
1. Grease with konsistentny J310a NLGI greasing of a point of turn of a pedal of an accelerator.
2. For hit prevention паров and the fulfilled gases in salon of the car put hermetic on a carving of bolts of fastening of an arm of a pedal of an accelerator.
3. Be convinced that the cable of an accelerator has no sharp excesses.
4. Check люфт an accelerator cable.
5. Establish all details and fix bolts and nuts, having tightened them the demanded moments.