Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
- 6. Fuel system
   6.1. Specifications (SOHC and DOHC)
   6.2. Check of the fuel pump
   6.3. Check of the pressure created by the fuel pump
   6.4. Checks of system of injection of MFI
   6.5. Control lamp of malfunctions (MIL)
   6.6. Diagnostic codes of malfunctions of "OBD-II"
   6.7. Diagnostic codes of malfunctions, except «OBD-II»
   6.8. Replacement of the fuel filter
   6.9. Replacement of the limiter of overflow (the double-thread valve)
   6.10. Fuel level sensor replacement
   6.11. Control system of the MFI engine
   6.12. Fuel nozzles
   6.13. Throttle knot
   6.14. A power supply system with the carburetor
   6.15. Check of frequency of rotation of idling
   6.16. Adjustment of frequency of rotation of idling
   6.17. Frequency of rotation of idling and adjustment of a fuel mix
   6.18. Check and adjustment of the starting arrangement
   6.19. Check and adjustment of a free wheeling of a cable of an accelerator
   6.20. Fuel tank
   6.21. Catching canister паров fuels
   6.22. Replacement of the fuel filter
   6.23. Carburetor
   6.24. Cable and accelerator pedal
   6.25. Search and elimination of malfunctions of fuel system with the carburetor
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






6.8. Replacement of the fuel filter

PERFORMANCE ORDER
1. Remove a pillow of back sitting and remove the inspection panel of the fuel pump. For pressure removal in fuel system disconnect the socket of the fuel pump, start the engine and wait while it will not stop in connection with production of fuel from топливопроводов and the fuel highway.
2. Disconnect a wire from the negative plug of the storage battery and connect the socket of the fuel pump.

Prevention

Before separation топливопроводов remove pressure in fuel system as, otherwise, the fuel being under pressure, will intensively follow from fuel system.


3. Turn out screws of fastening of clips of tubes of the fuel filter.

Prevention

Close the fuel filter a towel to exclude the razbryzgivany fuels, caused by residual pressure in топливопроводе.


4. Turn out bolts of fastening of the fuel filter and remove it from an arm.
5. After replacement of the fuel filter check tightness of fuel system.