| 1. Establish the car on an equal horizontal platform. |
| 2. Start the engine and warm up liquid of the amplifier of a steering to temperature 50~60°C. Turn a steering wheel from an emphasis against the stop several times. |
| 3. At operation of the engine idling turn a steering wheel from an emphasis against the stop several times. |
| 4. Check that in a tank of the amplifier of a steering there is no foaming. |
| 5. Switch off the engine and check a difference of levels of liquid in a tank at the working and switched-off engine. |
|
Prevention If a difference of levels of liquid more than 5 mm, remove air from a hydraulic drive of the amplifier of a steering.
If liquid level suddenly raises after engine switching off, further pumping of a hydraulic drive of the amplifier of a steering is not required.
Incomplete pumping of a hydraulic drive of the amplifier of a steering leads to emergence of the noise published by the pump and reduces durability of operation of the pump.
|