The device, service, Hyundai Accent repair - 12.7. Check of a torque of a pin of the spherical hinge of a tip of steering draft//effexor-xr.ru

Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
- 12. Steering
   12.1. Specifications
   12.2. Mechanism of adjustment of a tilt angle of a steering column
   12.3. Steering transfer without the amplifier of a steering
   12.4. Steering draft
   12.5. Check люфта a steering wheel on cars with the amplifier of a steering
   12.6. Check of an angle of rotation of forward wheels
   12.7. Check of a torque of a pin of the spherical hinge of a tip of steering draft
   12.8. Check of effort of turn of a steering wheel on cars with the amplifier of a steering
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Pumping of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of liquid in hydraulic system
   12.15. Steering transfer of cars with the amplifier of a steering
   12.16. Hoses of the amplifier of a steering
   12.17. Pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



12.7. Check of a torque of a pin of the spherical hinge of a tip of steering draft

PERFORMANCE ORDER
1. Screw two nuts on a pin of the spherical hinge of a tip of steering draft and measure a torque which is necessary for putting for a provorachivaniye of a pin of the spherical hinge.

Torque which is necessary for putting for a provorachivaniye of a pin of the spherical hinge: 2–5 N • m

2. If the torque exceeds admissible value, replace a tip of steering draft.

Prevention

If the torque of less admissible value, the spherical hinge can be reused, if it has no considerable люфта