Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
- 12. Steering
   12.1. Specifications
   12.2. Mechanism of adjustment of a tilt angle of a steering column
   12.3. Steering transfer without the amplifier of a steering
   12.4. Steering draft
   12.5. Check люфта a steering wheel on cars with the amplifier of a steering
   12.6. Check of an angle of rotation of forward wheels
   12.7. Check of a torque of a pin of the spherical hinge of a tip of steering draft
   12.8. Check of effort of turn of a steering wheel on cars with the amplifier of a steering
   12.9. Check of return of a steering wheel in a starting position
   12.10. Check of level of liquid
   12.11. Liquid replacement in a hydraulic drive of the amplifier of a steering
   12.12. Pumping of hydraulic system of the amplifier of a steering
   12.13. Check of a tension of a belt of a drive of the pump of the amplifier of a steering
   12.14. Check of pressure of liquid in hydraulic system
   12.15. Steering transfer of cars with the amplifier of a steering
   12.16. Hoses of the amplifier of a steering
   12.17. Pump of the amplifier of a steering
   12.18. Search and elimination of malfunctions (a steering without the amplifier)
   12.19. Search and elimination of malfunctions (a steering with the amplifier)
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



12.14. Check of pressure of liquid in hydraulic system

PERFORMANCE ORDER
1. Disconnect a pressure head hose from the pump of the amplifier of a steering. Between the disconnected pressure head hose and the pump connect the special measuring tool, as is shown in drawing.
2. Pump over a hydraulic drive of the amplifier of a steering, then start up the engine and turn a steering wheel several times so that the temperature of liquid raised to 50°C.
3. Increase frequency of rotation of a cranked shaft of the engine to 1000min-1.
4. Close the valve of the switch of the special tool and measure pressure.

The pressure of liquid created by the pump of the amplifier of a steering: 6,2 MPas


Prevention

Do not hold the valve of the switch of the special tool of the closed more than 10 pages.


5. Remove special tools and connect a pressure head hose to the pump, having tightened a connecting nut of a hose the demanded moment.

Inhaling moment: 55–65 N • m

6. Remove air from a hydraulic drive of the amplifier of a steering.