| 1. On the car standing on a firm horizontal surface, establish forward wheels for rectilinear movement. |
| 2. Increase frequency of rotation of a cranked shaft of the engine to 1000 mines-1. |
Prevention
After check leave the engine to work at frequency of rotation of idling
|
| 3. Hook on a dynamometer for a spoke of a steering wheel in a place which is most remote from the center of a wheel. With the forward wheels established for rectilinear movement, measure effort which is necessary for putting to a steering wheel for turn of wheels to the left and to the right. Effort: 34,3 N
|
| 4. Check that at turn of a steering wheel the application of excessive efforts is not demanded. |
5. If the measured effort exceeds demanded value, carry out the following checks:
– check on absence of damage protective covers of spherical hinges of the bottom lever and a tip of steering draft;
– a torque which is necessary for putting for a provorachivaniye of a pin of the spherical hinge of a tip of steering draft;
– a torque which is necessary for putting for a provorachivaniye of a pin of the spherical hinge of the bottom lever. |