Hyundai Accent

Repair and car operation



Hyundai Accent
- 1. Maintenance instruction
   1.1. General information about the car
   1.2. Keys
   1.3. Immobilizer (anticreeping system of blocking of start of the engine)
   1.4. Anticreeping system
   1.5. Locks of doors
   1.6. Children's safety lock of a back door
   1.7. Forward seats
   1.8. Window regulators
   1.9. System of the centralized management of locks of doors
   1.10. Precautionary measures when using seat belts
   1.11. Care of seat belts
   1.12. Fastenings of seat belts of forward seats regulated on height
   1.13. A three-dot seat belt of the driver with the inertial mechanism of blocking
   1.14. A seat belt with fastening in two points (the central seat belt of back sitting)
   1.15. Children's seats
   1.16. Inflatable safety cushions
   1.17. Dashboard and kontrolno measuring devices
   1.18. Index of level of fuel
   1.19. The index of temperature of cooling liquid
   1.20. Speedometer
   1.21. Odometer (counter of the passable way)
   1.22. Counter of daily run
   1.23. Tachometer
   1.24. The combined switch of light of headlights and turn indexes
   1.25. Switch of a cleaner and windscreen washer
   1.26. Cleaner and washer of back glass
   1.27. Proof-reader of light of headlights
   1.28. Alarm light system
   1.29. Heater of back glass
   1.30. Switch of forward fog lights
   1.31. Switch of tail antifog light
   1.32. Electronic clock
   1.33. Lighter
   1.34. Forward ashtray
   1.35. Back ashtray
   1.36. Coaster
   1.37. Sun-protection shtorka
   1.38. Hatch
   1.39. Lamp of illumination of salon
   1.40. Ware box
   1.41. External rear-view mirrors
   1.42. Heater of external rear-view mirrors
   1.43. Folding of external rear-view mirrors
   1.44. Internal rear-view mirror
   1.45. Parking brake
   1.46. Folding of backs of seats
   1.47. Back door / trunk lid
   1.48. Emergency opening of the lock of a trunk lid
   1.49. Remote opening of the lock of a back door / trunk lid
   1.50. Remote opening of a cover of a bulk mouth of a fuel tank
   1.51. Cowl opening
   1.52. Antisolar peak
   1.53. Adjustment of height of installation of a steering wheel
   1.54. Sound signal
   1.55. Heating and ventilation system
   1.56. The air purifier for the evaporator and the fan
   1.57. Stereosystem
   1.58. Aerial
   1.59. Car driving
   1.60. Ignition lock
   1.61. Start-up of the engine of cars with the carburetor engine
   1.62. Mechanical transmission
   1.63. Automatic transmission
   1.64. Anti-blocking system of brakes
   1.65. Economic driving
   1.66. Smooth passing of turns
   1.67. Movement in winter conditions
   1.68. Trailer or car towage
   1.69. The engine is not started
   1.70. If the engine is normally scrolled by a starter, but not started
   1.71. If the engine decayed during movement
   1.72. Engine start-up from the storage battery of other car
   1.73. If the engine overheated
   1.74. Car towage
   1.75. Emergency towage
   1.76. Prevention of corrosion and periodic leaving
   1.77. Identification number of the car (VIN)
   1.78. Technical characteristics of the car
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






1.29. Heater of back glass

Arrangement of the button of inclusion of a heater of back glass

The heater is intended for elimination of hoarfrost, a zapotevaniye and an icing of back glass in and outside of the car. For heater inclusion ignition should be included.

The heater will join by pressing of the button of a heater of back glass.

The heater of back glass will be switched off automatically through 15 mines or at ignition switching off.

If it is necessary to switch off a heater, again press the heater button. If on back glass there is a large amount of snow, before inclusion of a heater it is necessary to remove snow.


Prevention

For the purpose of prevention of damages of flat conductors of heating of the glass, being on back glass, never use for window cleaning sharp subjects or abrasive cleaners.
The heater of back glass works only at the working engine.