Following these instructions, you can save fuel and increase run of your car without refueling:
– move smoothly and avoid sharp accelerations. Try to move with constant speed and be not dispersed before a stop;
– try to keep speed of a transport stream to avoid superfluous change of speed. Whenever possible avoid driving in heavy transportation terms. Always keep a safe distance to the going in advance car to avoid superfluous braking. It also reduces wear of brake shoes;
– move with moderate speed. The speed of the car is higher, the more it spends fuels. Movement with moderate speed, especially on high-speed highways, is one of the most effective ways to lower fuel consumption;
– do not hold a foot on a brake or coupling pedal. It will lead to increase in fuel consumption, and also to increase in wear of details of these knots. Moreover, keeping of your foot on a pedal of a brake constantly during driving will lead to an overheat of brakes and loss of efficiency of their work that can lead to more serious consequences;
– watch tires of your car, support in tires recommended pressure of air. The wrong pressure of air in tires, too small or too big, results in their premature wear. Check pressure of air in tires at least once a month;
– check corners of installation of wheels as the wrong corners of installation of wheels can result in strong wear in the form of spots ("bald spots") on a protector. It also can result in the increased wear of tires and increase in fuel consumption;
– do not transport superfluous subjects in the car;
– do not allow operation of the engine idling more long, than it is necessary. If you expect something (and are not in a transport stream), switch off the engine and start it, only when will be ready to begin movement;
– remember, the car of HYUNDAI does not need the increased warming up of the engine. As soon as frequency of rotation of a cranked shaft of the engine becomes stable, you can begin movement, however, at very low air temperature, let's to the engine get warm a little;
– do not "overload" and do not allow excessive increase in frequency of rotation of a cranked shaft of the engine. To overload the engine means to move too slowly on too high transfer. Include a low gear.
– use rationally the conditioner as central air is put in action from energy of the engine therefore its use leads to decrease in fuel profitability. |