Hyundai Accent

Repair and car operation

Hyundai Accent
- 1. Maintenance instruction
   1.1. General information about the car
   1.2. Keys
   1.3. Immobilizer (anticreeping system of blocking of start of the engine)
   1.4. Anticreeping system
   1.5. Locks of doors
   1.6. Children's safety lock of a back door
   1.7. Forward seats
   1.8. Window regulators
   1.9. System of the centralized management of locks of doors
   1.10. Precautionary measures when using seat belts
   1.11. Care of seat belts
   1.12. Fastenings of seat belts of forward seats regulated on height
   1.13. A three-dot seat belt of the driver with the inertial mechanism of blocking
   1.14. A seat belt with fastening in two points (the central seat belt of back sitting)
   1.15. Children's seats
   1.16. Inflatable safety cushions
   1.17. Dashboard and kontrolno measuring devices
   1.18. Index of level of fuel
   1.19. The index of temperature of cooling liquid
   1.20. Speedometer
   1.21. Odometer (counter of the passable way)
   1.22. Counter of daily run
   1.23. Tachometer
   1.24. The combined switch of light of headlights and turn indexes
   1.25. Switch of a cleaner and windscreen washer
   1.26. Cleaner and washer of back glass
   1.27. Proof-reader of light of headlights
   1.28. Alarm light system
   1.29. Heater of back glass
   1.30. Switch of forward fog lights
   1.31. Switch of tail antifog light
   1.32. Electronic clock
   1.33. Lighter
   1.34. Forward ashtray
   1.35. Back ashtray
   1.36. Coaster
   1.37. Sun-protection shtorka
   1.38. Hatch
   1.39. Lamp of illumination of salon
   1.40. Ware box
   1.41. External rear-view mirrors
   1.42. Heater of external rear-view mirrors
   1.43. Folding of external rear-view mirrors
   1.44. Internal rear-view mirror
   1.45. Parking brake
   1.46. Folding of backs of seats
   1.47. Back door / trunk lid
   1.48. Emergency opening of the lock of a trunk lid
   1.49. Remote opening of the lock of a back door / trunk lid
   1.50. Remote opening of a cover of a bulk mouth of a fuel tank
   1.51. Cowl opening
   1.52. Antisolar peak
   1.53. Adjustment of height of installation of a steering wheel
   1.54. Sound signal
   1.55. Heating and ventilation system
   1.56. The air purifier for the evaporator and the fan
   1.57. Stereosystem
   1.58. Aerial
   1.59. Car driving
   1.60. Ignition lock
   1.61. Start-up of the engine of cars with the carburetor engine
   1.62. Mechanical transmission
   1.63. Automatic transmission
   1.64. Anti-blocking system of brakes
   1.65. Economic driving
   1.66. Smooth passing of turns
   1.67. Movement in winter conditions
   1.68. Trailer or car towage
   1.69. The engine is not started
   1.70. If the engine is normally scrolled by a starter, but not started
   1.71. If the engine decayed during movement
   1.72. Engine start-up from the storage battery of other car
   1.73. If the engine overheated
   1.74. Car towage
   1.75. Emergency towage
   1.76. Prevention of corrosion and periodic leaving
   1.77. Identification number of the car (VIN)
   1.78. Technical characteristics of the car
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes

1.55. Heating and ventilation system

The panel of system of heating and ventilation is shown in drawing.

Panel of system of heating and ventilation:

1–switch of operating modes of the fan;
2–handle of a choice of a mode of ventilation;
3–handle of adjustment of air temperature;
4–switch of a choice of a mode of a fence of air.

SWITCH OF OPERATING MODES OF THE FAN

The switch is intended for inclusion and switching off of the fan and a choice of frequency of its rotation. Frequency of rotation of the fan and, therefore, size of the air stream arriving from system of ventilation, can change manually by switch turn between provisions "1" and "4".

Switch of operating modes of the fan

SWITCH OF THE CHOICE OF THE MODE OF THE FENCE OF AIR

The switch is intended for switching of modes of ventilation between a mode of a fence of external air and a retsirkulyatsiya mode.

Switch of a choice of a mode of a fence of air

Mode of a fence of external air

In salon of the car the external air heated up or cooled depending on a choice of other functions arrives.

Mode of a retsirkulyatsiya of air

There is an air retsirkulyatsiya in salon of the car and its heating or cooling depending on a choice of other functions.

Prevention

Use of a mode of a retsirkulyatsiya of air can lead for a long time to a zapotevaniye wind and lateral glasses, and air in salon of the car becomes zastoyaly. Moreover, long operation of the conditioner in a mode of a retsirkulyatsiya of air can lead to that air in the car becomes too dry.

CHOICE OF THE MODE OF VENTILATION

The handle of a choice of a mode of ventilation is used for a choice of the direction of an air stream.

In head area

The air stream via deflectors arrives in the top part of salon of the car.

In feet / the head area

Air arrives via deflectors in the top part of salon of the car and in area of feet. It allows at the same time warm air to move via deflectors to feet, instead of warm or poorly warm air via deflectors in the top part of salon.

In area of feet

Air arrives only in area of feet.

In area of feet / to deflectors of heating of a windscreen and lateral glasses

Air arrives via deflectors in area of feet, and also to a windscreen and glasses of doors. At a mode choice (to deflectors of heating of a windscreen and lateral glasses) the conditioner will be switched automatically on.

To deflectors of heating of a windscreen and lateral glasses

Air via deflectors arrives only to a windscreen and glasses of doors of the car. At a mode choice (to deflectors of heating of a windscreen and lateral glasses) the conditioner will be switched automatically on.

HANDLE OF ADJUSTMENT OF AIR TEMPERATURE

The handle is used for inclusion and switching off of a heater and a choice of desirable air temperature.

Handle of adjustment of temperature вохдуха

Handles of management of a heater

For normal work of a heater, establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air and the handle of a choice of a mode of ventilation in situation (in area of feet).

Handles of management of a heater

For faster heating, establish the switch of a choice of a mode of a fence of air in a mode of a retsirkulyatsiya of air

In case of a zapotevaniye of glasses, establish the handle of a choice of a mode of ventilation in situation (to deflectors of heating of a windscreen and lateral glasses) (thus, it will be automatically included the conditioner), and the switch of a choice of a mode of a fence of air in a mode of a fence of external air.

For the maximum heating, establish the handle of adjustment of air temperature in the situation Warm (Hot air).

Mode of supply of air in feet / the head area

The mode of supply of air in area of the feet / the head allows at the same time warm air to move via deflectors to feet, and poorly warm air via deflectors in the top part of salon. To include this mode establish handles in the following provisions:

Position of handles in a mode of supply of air in feet / the head area

– establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– establish the handle of a choice of a mode of ventilation in situation (in feet / the head area);
– establish the handle of adjustment of air temperature between the provisions Cool (Cold air) and Warm (Hot air).

Ventilation mode

To include system of ventilation establish handles in the following provisions:

Position of handles in a ventilation mode

– establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– to direct all air stream via deflectors of heating of a windscreen and lateral glasses, establish the handle of a choice of a mode of ventilation in situation (in head area);
– as the switch of operating modes of the fan choose desirable frequency of rotation of the fan;
– establish the handle of adjustment of air temperature between the provisions Cool (Cold air) and Warm (Hot air).

CENTRAL DEFLECTOR

The central deflectors of system of ventilation are located in the dashboard center.

To change the direction of an air stream turn the handle of management being in the middle of the central deflector, in desirable situation.

Directions of moving of the handle of management of the central deflector

LATERAL DEFLECTOR

Lateral deflectors are located along the edges of the dashboard. To change the direction of an air stream turn the handle of management being in the middle of the lateral deflector, in desirable situation.

Directions of moving of the handle of management of the lateral deflector

REMOVAL OF HOARFROST / CONDENSATE (ZAPOTEVANY)

Use this mode for hoarfrost or condensate (zapotevaniye) removal.

Position of handles in a mode removal of hoarfrost / condensate (zapotevaniye)

For hoarfrost or condensate (zapotevaniye) removal from the interior of a windscreen:

– establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air in situation;
– establish the handle of a choice of a mode of ventilation in situation to deflectors of heating of a windscreen and lateral glasses (the conditioner will be thus switched automatically on);
– establish the handle of adjustment of air temperature in desirable situation;
– establish the switch of operating modes of the fan between provisions "1" and "4".

For hoarfrost or condensate (zapotevaniye) removal from outer side of a windscreen:

– establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– establish the handle of a choice of a mode of ventilation in situation (to deflectors of heating of a windscreen and lateral glasses) (the conditioner will be thus switched automatically on);
– establish the handle of adjustment of air temperature in the situation Warm (Hot air);
– establish the switch of operating modes of the fan in situation 3 or 4.

COUNCILS ON MANAGEMENT OF VENTILATION SYSTEM

For prevention of hit of a dust or undesirable smells in car salon, temporarily establish the switch of a choice of a mode of a fence of air in a mode of a retsirkulyatsiya of air.

For maintenance of freshness of air in the car do not forget to return the switch of a choice of a mode of a fence of air to a mode of a fence of external air.

It promotes cheerfulness and a comfortable condition of the driver.

Air for system of heating / cooling moves through the lattices located directly ahead of a windscreen. Watch that these lattices were free from leaves, snow, ice or other extraneous subjects.

CONDITIONER SWITCH

The conditioner turns on in pressing the conditioner switch control panels the heater / conditioner.

Conditioner switch

OPERATION OF THE CONDITIONER

Cooling

Conditioner use for air cooling in car salon:

Arrangement of handles at operation of the conditioner in a cooling mode

– having turned the switch of operating modes of the fan, switch off the fan;
– in pressing the switch of the conditioner turn on the conditioner. Thus in a combination of devices the control lamp of turning on of the conditioner will light up;
– establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– establish the handle of adjustment of air temperature in the situation Cool (Cold air). This situation provides the maximum cooling of air. The temperature of air arriving in salon can change handle moving towards the situation Warn (Hot air);
– as the switch of operating modes of the fan choose desirable frequency of rotation of the fan. For the maximum cooling, turn the switch of operating modes of the fan in the provision of one of the greatest speeds or temporarily establish the switch of a choice of a mode of a fence of air in a mode of a retsirkulyatsiya of air.

Draining heating

For draining heating execute the following actions:

Arrangement of handles at operation of the conditioner in a mode of draining heating

– having turned the switch of operating modes of the fan, turn on the fan. In pressing the switch of the conditioner turn on the conditioner. Thus in a combination of devices the control lamp of turning on of the conditioner will light up;
– establish the switch of a choice of a mode of a fence of air in a mode of a fence of external air;
– establish the handle of a choice of a mode of ventilation in situation in head area;
– as the switch of operating modes of the fan choose desirable frequency of rotation of the fan;
– for acceleration of process turn the switch of operating modes of the fan in the provision of one of the greatest speeds;
– the handle of adjustment of air temperature establish size of desirable temperature.

Councils on management of the conditioner

If air in the car too hot, open all windows for some minutes to cool air in car salon.

At operation of the conditioner all glasses should be closed not to allow hit of warm air in car salon.

At slow movement of the car, for example in traffic jam, include lower transfer. It will increase frequency of rotation of a cranked shaft of the engine that in turn will increase frequency of rotation of the compressor of the conditioner.

On steep slopes switch off the conditioner to exclude possibility of an overheat of the engine.

During the winter period of time, or in irregular use of the conditioner, turn on the conditioner once a month for some minutes. It prevents deterioration of greasing of internal details of the compressor and provides central air maintenance in a good condition.