1. Be convinced that the auxiliary battery has tension 12 In and that its negative plug is earthed. |
2. Check electrolit level in storage batteries everyone bank. |
3. If the auxiliary battery is in other car, do not allow, that cars adjoined. |
4. Switch off everything unnecessary electric consumers. |
5. Connect all cables in the exact sequence shown in drawing 120. At first connect one end of a cable to the positive plug (+) the discharged battery, then the second end of the same cable to the positive plug (+) the auxiliary battery. Further connect one end of the second cable to the negative plug (–) the auxiliary battery and then the second end to a mass, stationary metal point (for example, to an engine support) besides the battery. Do not connect a cable to moving parts or in them близи since at start-up they could be damaged. Do not connect a cable from the negative (–) plugs of the auxiliary battery to the negative plug (–) the discharged battery. Do not allow, that cables concerned everything except for the corresponding plugs of batteries or the correct grounding. At accession of cables do not bend over the battery. |
| Sequence of connection of cables at engine start-up from the storage battery of other car. |
6. Start up the car engine from the auxiliary battery and leave it to work at frequency of rotation of 2000 mines-1. Then start up the car engine with the discharged battery. If the reason of a discharge of your battery is not obvious, for example, headlights of the car remained casually included, you should hand over the car on check to the authorized dealer of HYUNDAI. |