Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Anti-blocking system of brakes (ABS)
   13.3. Pumping of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of provision of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Pumping of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of the parking brake
   13.8. Vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. Pressure regulator
   13.11. Brake pedal
   13.12. Replacement of forward brake shoes
   13.13. Support of a forward brake
   13.14. Main brake cylinder
   13.15. Replacement of brake shoes on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. Parking brake
   13.18. Hydraulic HECU ABS block
   13.19. Sensor of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected


13.19. Sensor of frequency of rotation of a wheel

1–rotor;

2–forward sensor of frequency of rotation of a wheel, 8–9,5 N • m;

3–back sensor of frequency of rotation of a wheel, 15,5–16,5 N • m.

Removal

Forward sensor of frequency of rotation of a wheel


PERFORMANCE ORDER
Turn out a bolt and remove the forward sensor of frequency of rotation of a wheel after a socket detachment.

Back sensor of frequency of rotation of a wheel

PERFORMANCE ORDER
1. Remove a pillow of back sitting.
2. Remove an upholstery of a back rack.
3. Remove a back wheel.
4. Remove the back sensor of frequency of rotation of a wheel after a socket detachment.

Check

PERFORMANCE ORDER
1. Measure resistance of the sensor of frequency of rotation of a wheel.

Resistance:
Forward sensor: 1275–1495 Ohm
Back sensor: 1275–1495 Ohm

2. Establish the sensor of frequency of rotation of a wheel on the car and, having connected the voltmeter to sensor contacts, measure the tension developed by the sensor at rotation of a wheel.

Prevention

Switch the voltmeter for measurement of an alternating voltage.