Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Anti-blocking system of brakes (ABS)
   13.3. Pumping of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of provision of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Pumping of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of the parking brake
   13.8. Vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. Pressure regulator
   13.11. Brake pedal
   13.12. Replacement of forward brake shoes
   13.13. Support of a forward brake
   13.14. Main brake cylinder
   13.15. Replacement of brake shoes on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. Parking brake
   13.18. Hydraulic HECU ABS block
   13.19. Sensor of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes

13.11. Brake pedal

1–switch of stoplights;
2–plugs;

3–arm;
4–spring;
5–pedal

Removal

PERFORMANCE ORDER

1. Remove the switch of stoplights.
2. Unscrew nuts with a fillet (4EA) and a bolt (1EA) of fastening of an arm of a pedal of a brake.
3. Remove шплинт and remove a pin with a head and an opening under шплинт.
	4. Remove knot of a pedal of a brake.

Check

PERFORMANCE ORDER

1. Check the plug on lack of wear.
2. Check a brake pedal on lack of curvatures.
3. Check a spring of return of a pedal of a brake on absence of damages.
	4. Check the switch of stoplights 1) An ohmmeter connected to plugs of the switch of stoplights, check its conductivity. 2) By pressing of a plunzher conductivity should be absent and appear at release of a plunzher.

Installation

PERFORMANCE ORDER

1. Installation is carried out to sequences, return to removal.
Prevention Be convinced that established шплинт on a pin with a head and an opening under шплинт drafts of a pedal of a brake.
2. Establish knot of a pedal of a brake and fix nuts with a fillet and a bolt. Inhaling moment: 8–12 N • m
3. Check and, if necessary, adjust height of installation of a pedal and a free wheeling of a pedal of a brake.
	4. Establish the switch of stoplights.