Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Anti-blocking system of brakes (ABS)
   13.3. Pumping of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of provision of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Pumping of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of the parking brake
   13.8. Vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. Pressure regulator
   13.11. Brake pedal
   13.12. Replacement of forward brake shoes
   13.13. Support of a forward brake
   13.14. Main brake cylinder
   13.15. Replacement of brake shoes on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. Parking brake
   13.18. Hydraulic HECU ABS block
   13.19. Sensor of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






13.18. Hydraulic HECU ABS block


Installation

PERFORMANCE ORDER
1. Separate brake tubes from the HECU block.
2. Turn out bolts of fastening of an arm and remove the HECU block together with an arm.

Prevention

Do not assort the hydraulic HECU block.
Transportation of the HECU block is necessary for carrying out in vertical situation with the openings of the block closed by suitable caps as brake liquid should not merge from the block.


3. Disconnect from the HECU block the electric socket.

Installation

PERFORMANCE ORDER
1. Installation is carried out to sequences, return to removal.
2. Tighten bolts of fastening of the modulator and a nut of fastening of brake tubes the demanded moments of an inhaling.

Inhaling moments:
Bolt of fastening of the HECU block: 8–10 N • m
Connecting nuts of fastening of brake tubes: 13–17 N • m