Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
- 13. Brake system
   13.1. Specifications
   13.2. Anti-blocking system of brakes (ABS)
   13.3. Pumping of hydraulic system of a drive of brakes with scanner use
   13.4. Check and adjustment of provision of a pedal of a brake
   13.5. Check of the vacuum amplifier of brakes
   13.6. Pumping of hydraulic system of a drive of brakes
   13.7. Adjustment of a course of the parking brake
   13.8. Vacuum amplifier of brakes
   13.9. Brake tubes and hoses
   13.10. Pressure regulator
   13.11. Brake pedal
   13.12. Replacement of forward brake shoes
   13.13. Support of a forward brake
   13.14. Main brake cylinder
   13.15. Replacement of brake shoes on back drum-type brakes
   13.16. Replacement of the working brake cylinder
   13.17. Parking brake
   13.18. Hydraulic HECU ABS block
   13.19. Sensor of frequency of rotation of a wheel
   13.20. Search and elimination of malfunctions
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






13.6. Pumping of hydraulic system of a drive of brakes

PERFORMANCE ORDER
1. Uncover a compensatory tank with brake liquid.

Prevention

Brake liquid dissolves paint, plastic and isolation of wires therefore at casual hit of liquid on a paint and varnish covering of the car or its components wash out them a large amount of water.
When pumping under pressure do not press a brake pedal


2. Unscrew a cover from the union of pumping and attach to it one end of a transparent hose, and other end of a hose insert into the glass capacity of sufficient volume half filled with brake liquid.
3. Slowly press a brake pedal several times.
4. At the pressed pedal of a brake a key weaken the union of pumping and let the air out from hydraulic system. Tighten the union of pumping and release a brake pedal.
5. Repeat operations 3 and 4 until there will be a brake liquid without air vials.
6. Tighten the pumping union.

Inhaling moment: 7–9 N • m

7. Removal of air carry out in the sequence shown in drawing.