Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
- 16. Electric equipment
   16.1. Specifications
   16.2. Electric chains
   16.3. Charging system
   16.4. Check of an electric chain of a charging
   16.5. Power failure check on a wire connecting the storage battery to the generator
   16.6. Check of the current developed by the generator
   16.7. Check of developed tension
   16.8. Generator
   16.9. Storage battery
   16.10. Check of specific weight of electrolit
   16.11. Charging of the storage battery
   16.12. Survey of the storage battery
   16.13. Start system
   16.14. Starter
   16.15. Check and replacement of elements of a stator
   16.16. Switch of blocking of ignition
   16.17. Check of the relay of a starter
   16.18. Check of the switch of blocking of ignition
   16.19. Radio receiver
   16.20. Loudspeakers
   16.21. Aerial
   16.22. Multipurpose switch
   16.23. Sound signal
   16.24. Safety locks
   16.25. Combination of devices
   16.26. Engine of a screen wiper of a windscreen
   16.27. Replacement of a headlight and forward index of turn
   16.28. Adjustment of light of headlights
+ 17. Appendix
+ 18. Electroschemes

16.14. Starter

1–forward cover;
2–forward plug;
3–cover;
4–bolt;
5–solenoid of the traction relay;
6–plunzher;
7–spring;
8–laying;
9–lever;
10-holders;
11-spring;
12-cap;

13-washer;
14-persistent ring;
15-stopper;
16-obgonny coupling;
17-rotor;
18-washers;
19-stator;
20-shchetkoderzhatel;
21-back cover;
22-back plug;
23-bolt;
24-screw.

Elements of fastening of a starter

1–bolt, 9,8–16 N • m;
2–starter;

3–bolt, 26–33 N • m.

Removal and installation

PERFORMANCE ORDER

1. Disconnect a wire from the negative plug of the storage battery.

2. Disconnect a cable of a drive of a speedometer.

3. Disconnect from a starter the socket and a wire from the plug.

4. Turn out bolts and remove a starter.

5. Installation is carried out to sequences, return to removal.