Hyundai Accent

Repair and car operation


Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
- 16. Electric equipment
   16.1. Specifications
   16.2. Electric chains
   16.3. Charging system
   16.4. Check of an electric chain of a charging
   16.5. Power failure check on a wire connecting the storage battery to the generator
   16.6. Check of the current developed by the generator
   16.7. Check of developed tension
   16.8. Generator
   16.9. Storage battery
   16.10. Check of specific weight of electrolit
   16.11. Charging of the storage battery
   16.12. Survey of the storage battery
   16.13. Start system
   16.14. Starter
   16.15. Check and replacement of elements of a stator
   16.16. Switch of blocking of ignition
   16.17. Check of the relay of a starter
   16.18. Check of the switch of blocking of ignition
   16.19. Radio receiver
   16.20. Loudspeakers
   16.21. Aerial
   16.22. Multipurpose switch
   16.23. Sound signal
   16.24. Safety locks
   16.25. Combination of devices
   16.26. Engine of a screen wiper of a windscreen
   16.27. Replacement of a headlight and forward index of turn
   16.28. Adjustment of light of headlights
+ 17. Appendix
+ 18. Electroschemes





16.5. Power failure check on a wire connecting the storage battery to the generator

 This check allows to define reliability of connection of the plug "B" of the generator with the positive plug of the storage battery.

Preparation for check
PERFORMANCE ORDER
1. Include ignition.
2. Connect the digital voltmeter to the plug "B" of the generator and to the positive plug of the storage battery.

Check condition

PERFORMANCE ORDER
Start the engine, include headlights, the fan of a heater and other consumers of electric energy and read indications on the voltmeter.

Result of check
PERFORMANCE ORDER
1. The voltmeter should show tension of 0,3 Century.
2. If tension more than 0,3 In, means, the wire has damages or it is unreliably connected to plugs of the generator and the storage battery.

For check of a wire connect the plug "B" and the positive plug of the storage battery an additional wire to a fusible insert.

Check reliability of connection of a wire to plugs, and also be convinced that isolation of a wire is not melted from its overheat.
3. In summary, switch off everything consumers of electric energy and stop the engine.