Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
- 15. Central air
   15.1. Specifications
   15.2. Instruction on coolant application
   15.3. Remarks at replacement of elements of central air of air
   15.4. Connection of elements of central air of air
   15.5. Check of elements of central air established on the car
   15.6. Installation of manometers for pressure measurement
   15.7. Pumping of atmospheric air from central air
   15.8. Charging of central air of air
   15.9. Check of level of a coolant
   15.10. Verification of operational characteristics
   15.11. Oil for greasing of the compressor of the conditioner
   15.12. Relay check
   15.13. Conditioner compressor
   15.14. Plug of coupling and pulley of the compressor of the conditioner
   15.15. Coil of initiation of coupling
   15.16. Compressor check on the car
   15.17. Sensor of threefold (double) pressure
   15.18. Fan and condenser
   15.19. Evaporator
   15.20. Check of the thermostatic sensor (termistor)
   15.21. Air filter of the evaporator
   15.22. Heating and ventilation block
   15.23. Heater block
   15.24. Fan
   15.25. Search and elimination of malfunctions
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes
Heavy Metal & Reflected



15.13. Conditioner compressor

1–conditioner compressor;
2–bolt, 20,4–30,6 N • m;
3–pulley of the compressor of the conditioner;
4–bolt, 17 N • m;
5–arm conditioner compressor;
6–tension roller;
7–belt of a drive of the compressor of the conditioner;
8–pulley of a cranked shaft.

Removal and installation


PERFORMANCE ORDER
1. Discharge air central air.
2. Disconnect the electric socket from the electromagnetic coupling.
3. Lift the car.
4. Weaken a tension and remove a belt of a drive of the compressor of the conditioner.
5. If necessary turn out bolts of fastening of the forward exhaust silencer.
6. Remove a hose of a discharge and soaking-up filter.
7. Turn out bolts of fastening of the compressor of the conditioner.
8. Remove the conditioner compressor. Immediately close all open openings and tubes for an exception of hit of moisture of air in air central air.
9. Installation is carried out to sequences, return to removal, taking into account the following:

– fill in in the compressor fresh oil;
– before installation of sealing rings oil them;
– do not grease connecting nuts of unions of the compressor of the conditioner;
– tighten entrance and target hoses the demanded moment;
– adjust a tension of a belt of a drive of the compressor of the conditioner.