Hyundai Accent

Repair and car operation



Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
+ 9. Transmission
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
- 15. Central air
   15.1. Specifications
   15.2. Instruction on coolant application
   15.3. Remarks at replacement of elements of central air of air
   15.4. Connection of elements of central air of air
   15.5. Check of elements of central air established on the car
   15.6. Installation of manometers for pressure measurement
   15.7. Pumping of atmospheric air from central air
   15.8. Charging of central air of air
   15.9. Check of level of a coolant
   15.10. Verification of operational characteristics
   15.11. Oil for greasing of the compressor of the conditioner
   15.12. Relay check
   15.13. Conditioner compressor
   15.14. Plug of coupling and pulley of the compressor of the conditioner
   15.15. Coil of initiation of coupling
   15.16. Compressor check on the car
   15.17. Sensor of threefold (double) pressure
   15.18. Fan and condenser
   15.19. Evaporator
   15.20. Check of the thermostatic sensor (termistor)
   15.21. Air filter of the evaporator
   15.22. Heating and ventilation block
   15.23. Heater block
   15.24. Fan
   15.25. Search and elimination of malfunctions
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes






15.25. Search and elimination of malfunctions

Sign
Probable cause
Elimination method
There is no air stream The fan engine does not work Check an electric power-supply circuit of the engine
The engine of the fan works Check the following elements:

– channels of supply of air are hammered;
– the fan exit is hammered;
– the radiator of a heater or a hose is hammered;
– the air zaslonka is faulty;
– the management cable is faulty.
Insufficient stream of warm air Speeds of operation of the fan do not change Check an electric power-supply circuit of the engine
The fan works properly Check the following elements:

– channels of supply of air are hammered;
– the fan exit is hammered;
– wrong provision of an air zaslonka.
The compressor does not turn on even thus that the fan of the condenser works Check an electric power-supply circuit of the engine
The compressor and the fan of the condenser do not turn on Check electric power-supply circuits of engines
Only the fan of the condenser does not turn on Check an electric power-supply circuit of the engine