Hyundai Accent

Repair and car operation

Hyundai Accent
+ 1. Maintenance instruction
+ 2. Engine
+ 3. Greasing system
+ 4. Cooling system
+ 5. Control, decrease in toxicity
+ 6. Fuel system
+ 7. Ignition system
+ 8. Coupling
- 9. Transmission
   + 9.1. Mechanical transmission
   - 9.2. Automatic transmission
      9.2.1. Specifications
      9.2.2. Control lamp of malfunctions (MIL)
      9.2.3. Diagnostic codes of malfunctions
      9.2.4. Reading of codes of malfunctions
      9.2.5. Check of pressure of transmission liquid
      9.2.6. Testing of collaboration of an automatic transmission and the engine on the motionless car (stall test)
      9.2.7. Check of level of liquid in an automatic transmission
      9.2.8. Check of operation of the lever of the selector
      9.2.9. Adjustment of the switch of indication of position of the lever of the selector
      9.2.10. Adjustment of the servo-driver of compulsory inclusion of a low gear
      9.2.11. Pressure adjustment in the highway
      9.2.12. Replacement of an oil sealing ring of a power shaft
      9.2.13. Replacement of a cable of a drive of a speedometer
      9.2.14. Removal and transmission installation
      9.2.15. Transmission repair
      9.2.16. Selector lever
      9.2.17. Adjustment of a cable of management
      9.2.18. Repair of the lever of the selector
+ 10. Axes and power shafts
+ 11. Suspension bracket
+ 12. Steering
+ 13. Brake system
+ 14. Body
+ 15. Central air
+ 16. Electric equipment
+ 17. Appendix
+ 18. Electroschemes

9.2.7. Check of level of liquid in an automatic transmission

1. Start the engine before transmission warming up to temperature 60~70°C.
2. Establish the car on an equal horizontal surface.
3. At the working engine press a pedal of a brake and consistently move the selector lever from a position N to all positions then establish it in a position N, holding the lever in each position no more than 3 pages.
4. Before extraction щупа wipe from dirt area near щупа. Get щуп and check a condition of transmission liquid. Check color of liquid in an automatic transmission. Check liquid in an automatic transmission on presence of unusual smells. For definition of change of color and a smell of liquid compare it to fresh liquid.

5. Check level of liquid which should be between HOT labels. If necessary add necessary amount of demanded liquid.

Liquid type for an automatic transmission: GENUINE DIAMOND ATF SP–II

Low level of liquid can be at the bottom of many malfunctions as air and a liquid suspension gets to liquid with air becomes compressed that leads to chaotic change of pressure and violation of work of couplings and tape brakes.

Also raised level of liquid leads to that rotating gear wheels of a transmission shake up foam which leads to the same results, as the air which has got to transmission liquid.